|
470
|
| Available Options |
|
Shutters are available in 1, 2, 3, 4, and 6 panel configurations, depending on size selected.
Hinge Colors: White, Silk White, Ivory, Brass, Chrome and Antique Bronze
Three available Louver Sizes: 2 3/8", 3 3/8", or 4 1/2
Rear Tilt
|
| Specifications |
| Minimum Width |
10" |
| Maximum Width |
105" |
| Minimum Height |
20" |
| Maximum Height |
120" |
| 2 3/8" louver requires |
2" depth or more |
| 3 3/8" louver requires |
2 1/2" depth or more |
| Frame Dimenions |
Click here to see shutter frame dimensions |
| Made in |
Custom Assembled in USA |
|
|
Reviews coming soon!
c_product
470
8563
 |
| |
 
|
Satinwood Plantation Shutters
| Satinwood shutters are made of specially formulated ultraviolet resistant poly-satin compounds, and are guaranteed never to warp, fade, chip or peel, regardless of high heat or other extreme climate conditions. Offered in three popular colors: white, silk white and ivory. These satinwood vinyl plantation shutters are designed for quick installation and easy care.
Made for us by Hunter Douglas, these high quality window shutters come with features not available by others, such as the No-Magnet Lock System, which is now standard. The entire shutter is reinforced throughout with aluminum frames for added stability. They come standard with simple but tasteful frames for a beautiful finished look. The louvers are oval-shaped to provide less obstructed view between the louvers. You'll get the ability to adjust the tension of the louvers so they don't flop down. Or you can tighten them to prevent curious cats or children from opening them.
Available in Inside (L-Frame or Z-Frame; see gallery for image of Z-Frame) or Outside Mount, 2-3/8", 3-3/8", or 4 1/2" louvers. Highly resistant to moisture and damage, use them in your bathroom, kids' room, or anywhere pets are especially active. Most come to you fully assembled, with all mounting hardware and easy-to-follow installation instructions; so these shutters are easy to install.
- Hunter Douglas quality with a Lifetime Limited Warranty.
- Up to 40% less expensive than custom-sized wood shutters.
- custom-made in approximately 15 business days.
- Easy to install. Use ordinary household tools. Most come to you fully assembled.
- Low maintenance; never requires painting.
- Resists moisture; easy to clean with just soap and water.
- Will not fade, crack, peel, or warp.
Color shown in picture is White 137. Just read below (you can also use the bulleted links above to the right). Then when you're ready, press the "Customize & Purchase " button.
|
-
|
Choose color:
- White, Silk White, or Ivory; normally it's best to match the trim or sill color.
Choose Louver Size:
- 2 3/8" or 3 3/8"
- The 2 3/8" size is more traditional, and better-suited for Colonial and Victorian styled homes.
- The 3 3/8" size is more contemporary, but is perfectly fine in traditional homes. The larger the window, the more likely the 3 3/8" size is scaled better. But it is usually best NOT to mix sizes within your home.
Determine the configuration:
Determine if your window sill protrudes:
- For each of your windows see if you have a window sill that protrudes out into the room. This will determine how your shutter's frame is designed.
 
Determine your Window Depth & Mount:
Window Depth
Measure from the front edge of your drywall or front edge of trim surrounding your window opening back to the first obstruction. This could be a handcrank, security device, ledge, or the window itself. Note whether this distance is 1½" or more. If so, you can select an Inside Mount.
Mount
Decide whether you want the shutter to Mount recessed within your window opening, known as an "Inside Mount", OR Outside the window opening on the trim (if any) or directly on the wall, known as an "Outside Mount". An Outside Mount is recommended for windows that are not perfectly square, as Outside Mount shutters are more forgiving. Also keep in mind that if you have less than 1 3/8;" of depth in the previous step it must be an Outside Mount.
Measure your windows (width & height):
- Available for rectangular and square windows only(specialty shapes such as arch/angle tops not available).
- Cafe shutters, sometimes called "half shutters" can also be made for you. They normally cover the bottom half of your window, but can be made at any height. Please specify the height of the Cafe Shutter, NOT the window height.
Determine if you need/want a Divider Rail:
- Divider rails add strength to your shutters, and allow you to operate the top louvers independently from the bottom louvers. The most common placement of a Divider Rail is in the exact center of the panel.
|
Custom made in just 15 business days. |
|
|
|
 |
|
Loading...
